CFIP Lumina

OVERVIEW

Intended for Gigabit Ethernet backbone applications. CFIP Lumina systems are delivering up to 366 Mbps per radio. 2+0 aggregation is available for higher bandwidth users. Both single or dual, electrical and fibre optical interface versions are available, as well as hybrid version with 1 optical and 1 electrical port.

Highlights and Benefits

p1

High capacity throughput

Market-proven technology supporting 256 QAM modulation and 56 MHz channel bandwidth ensures a high throughput capacity of up to 366 Mbps per radio.

p1

Excellent lightning protection

Optical Ethernet ports provide long distance fibre-to-antenna connection, thus completely securing your network equipment against eventual damage caused by lightning strikes.

p1

Enhanced Ethernet functionality

Built-in managed Gigabit Ethernet switch supports QoS, up to 4093 concurrent VLANs, 9728 bytes jumbo frames and other essential features, which allow to setup and maintain highly customized end-user connectivity services.

p1

Cost-effective all-outdoor solution

Modem with ACM and ATPC support, Ethernet switch with fibre-optical ports and high performance radio – all built into very compact single enclosure. Good link performance with smaller antennas, shelter/cabinet-free site installation result in lower total cost of ownership comparing to alternative legacy setups.

p1

Flexible network configuration

With two Gigabit Ethernet ports it is possible to use Lumina in various network topologies (for instance, ring, repeater chain) and configurations (aggregation, link protection, port-separated management).

 

Key Characteristics

ETSI FCC
Capacity Up to 366 Mbps
Frequency bands 6; 7; 8; 10; 11; 13; 15; 17; 18; 23; 24; 26; 30; 38 GHz 6; 11; 13; 15; 18; 23; 24; 30; 38 GHz
Modulations 4QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
Channel Bandwidth 14/28/40/56 MHz 20/30/40/50/56 MHz
Interfaces 1 or 2 RJ-45 (electrical); 1 or 2 ODC (fiber optical); Hybrid: 1 RJ-45 (electrical) & 1 ODC (optical)
Traffic Ethernet only
Form factor 288x288x80 mm; 3.9 kg 11.2x11.2x3.1 inch; 8.6 lbs
Power consumption 27-40W Standard radio power version; 43-52W High radio power version

DOWNLOADS

Case Studies
cropped-logo-2.png

Buzcom Case Study

cropped-logo-2.png

George Zimmerman trial broadcast

cropped-logo-2.png

VRT Case Study

cropped-logo-2.png

St. Helena Island Case Study

cropped-logo-2.png

Custom Connect Case Study

cropped-logo-2.png

Case Study RebeloakSL Spain 2013

cropped-logo-2.png

Australia Clubs Resorts network

cropped-logo-2.png

DE Imosnet Lumina CS ENG

cropped-logo-2.png

DE Imosnet Lumina CS GER2

cropped-logo-2.png

Canada Lumina CS

cropped-logo-2.png

USA Turnkey solution carrier

cropped-logo-2.png

USA ISP Network

cropped-logo-2.png

USA Backbone upgrade

Datasheets
cropped-logo-2.png

CFIP Lumina FODU ETSI

cropped-logo-2.png

CFIP Lumina FODU FCC

cropped-logo-2.png

CFIP Lumina FODU

Pictures
cropped-logo-2.png

CFIP Lumina product image

Product Brochures
cropped-logo-2.png

SAF CFIP Lumina (English)

cropped-logo-2.png

SAF CFIP Lumina leaflet (Russian)

cropped-logo-2.png

Product Overview leaflet ENG

RMA
cropped-logo-2.png

Next Day Replacement Ordering Form

cropped-logo-2.png

RMA Request Form

Solutions
cropped-logo-2.png

SAF video surveil applications ETSI

cropped-logo-2.png

SAF video surveil applications FCC

cropped-logo-2.png

CFIP Solar solution

Visio Stencils
cropped-logo-2.png

SAF Visio Stencil Set

Whitepapers
cropped-logo-2.png

Link Aggregation - internal and external

cropped-logo-2.png

Minimum Angle Interference

cropped-logo-2.png

Truth about the real capacity

cropped-logo-2.png

Licensed and unlicensed

cropped-logo-2.png

FODU Advantages, CAPEX & OPEX

Accessories

p1
Hermetical DC connector for power cable. PART NUMBER I0ACNP01

p1
Hermetical RJ-45 cable connector case for CFIP Lumina. PART NUMBER I0ACNR01

p1
Optical cables ODC to LC, ODC to SC and ODC to ODC. PART NUMBER Please inquire for needed type and length.

p1
SFP 850nm MM Transceiver 1000Base-SX 3.3V. SFP 1310nm SM Transceiver 1000Base-LX 3.3V. PART NUMBER I0AMOM01, I0AOM001
 

Antennas

SAF Tehnika offers full spectrum of high quality directional solid (grid – where applicable) parabolic antennas of all commercially available sizes and frequencies made by world’s leading manufacturers. All standard antennas are fully integrated for use with radio units manufactured by SAF Tehnika. We also offer all kinds of passive components, such as couplers (integrated/stand-alone), OMTs, four-way transducers, for aggregated and protected links, as well as antennas and accessories (flexible waveguides, remote-mounting brackets, flange-to-N adapters, coaxial cables etc) for solutions where direct mounting of SAF radios is not provided. To select an appropriate antenna according to your climate zone and many other parameters, please, contact your sales representative.
pandora pas cher pandora pas cher pandora pas cher pandora pas cher pandora pas cher pandora pas cher pandora outlet pandora outlet pandora outlet pandora outlet pandora outlet pandora outlet louboutin pas cher louboutin pas cher louboutin pas cher louboutin pas cher louboutin pas cher peuterey outlet peuterey outlet peuterey outlet peuterey outlet peuterey outlet peuterey outlet moncler outlet woolrich outlet